-
- Nowadays, ATF exchange through equipment is an international tendency, since exchange by gravity can only replace 35-55% ATF for different car models.
Another advantage of utilizing equipment to do ATF exchange is that you can flush the A/T system with proper detergent to completely remove the oil sludge. Both CM-102 and CM-102+ have this Flush function. And CM-102+ has optional heating function, to meet high tempera ture requirements of some car models, which have thermostat inside A/T system.
- Message
Functions/Specifications:
1.Voltage: AC220V 50Hz/60Hz or 110V 60Hz (Bi-viot optional)
2.Output: 200W
3.Load cell range: 80KG
4.Fully automatic
5.Printer
6.Pressure gauge: 2
7.Pump
8.Temperature monitor on both new ATF and used ATF
9.New ATF Heating: optional
10.Automatic identification of out and return oil direction
11.Pressure gauge: 0~10 bar(0~150 psi, for both new/used oil)
12.Detergent bottle capacity: 500ml
13.Capacity of old/new fluid drum: 25L
14.Exchange accuracy: ±100ml
15.Length of out and return hose: 2.7m
16.Drainage hose: 1m
17.Display: 7"Touch screen
18.Database
19.Flush: Add detergent to A/T system.Just with equipment connected to A/T, even turned off, can perform flush function
20.Exchange: Accurately take out used fluid from A/T system, meanwhile charge new fluid to the system increase or decrease
ATF level of the A/T system
21.Drain: One-click to empty the new/used fluid drum of the e quipment
22.Dimensions: Package:640*710*1170mm; Unpacked machine: 590*650*1060mm